PIC Design is pleased to offer an extensive selection of precision hardware to support our full line of mechanical components and accessories. In our pursuit to be a full-service, one-stop supplier, we offer this product line to save you time and minimize effort in completion of your project. In addition to supplying standard and modified parts, we can also provide hardware kits for a range of sizes, and perform assembly of small components as a value-added service.
What precision hardware types do you offer?
PIC Designs precision hardware components are typically constructed from 300 series stainless steel, spring steel, or aluminum. As always, if you dont see it listed, just ask us.
What are typical precision hardware applications?
Precision hardware products and kits that weve supplied to our customers are used in the following:
Electrical Equipment - Electrical Connectors
Our diverse selection of materials and products allows us to meet just about any project requirement. For more information, please contact us today.
Precision Hardware Product Offerings
To support our rotary and linear motion products, we offer a large selection of hardware geared towards locating and fastening precision components. If you don't see the exact part you need, let us know, we can usually quote modifications or alternative designs.
Please click product for specifications or to order
These washers will provide a spring force when compressed, useful for pre-loading assemblies or adding flexibility to a bolted joint. These parts can be stacked in parallel or series to fine tune the spring load. We offer Belleville Washers in a number of inch and metric sizes.
Breadboards are component mounting plates with a series of slots that allow fine adjustment of component location. We offer several breadboard sizes and the corresponding feet and mounting hardware.
These screws feature a shoulder under the head that is narrower than the root of the thread. This allows the screw to be captured between the head and threaded end when screwed into a plate with a threaded hole.
An engraved pointer that can be mounted adjacent to a dial and serve as a reference point. Models are available for disc dials and drum dials.
A threaded lock designed to hold a flat disc dial in position against an adjacent panel.
Precision engraved disc dial and pointer with a Vernier scale.
Slip, interference and press fits available in inch and metric sizes.
Precision engraved drum dial and pointer with a Vernier scale.
Engraved discs that can be assembled with PIC's standard hubs. Available in several diameters and degree ranges.
Engraved drums that can be assembled with PIC's standard hubs. Available in several diameters and degree ranges.
An engraved plexiglass or aluminum pointer that can be mounted adjacent to a dial and serve as a reference point.
A 2'' hand crank with bore sizes to match our standard shafting.
Threaded or tapped handles in many styles and sizes.
Adjustment knobs with a knurled outside diameter, available from 1'' to 2'' diameter with bore sizes to match our standard shafting.
Threaded nuts in inch and metric sizes that have a round, knurled outside diameter for rapid assembly.
Screws in inch and metric sizes that have a round, knurled head for rapid assembly.
These fasteners feature an integrated clamp with a special shape that allows for easy attachment of flanged motors, servos, encoders and syncros. Available in several sizes and mounting styles.
Internal and external retaining rings in inch and metric sizes. See our catalog for recommended groove dimensions.
Slotted and socket head set screws in inch and metric sizes. Specialized tip styles available.
Slotted, socket, and Phillips head shoulder screws in inch and metric sizes.
Precision spacers with tapped ends for mounting parts at a distance. Made from square stock, these parts come in lengths from 1'' to 5''.
Several styles of compression and extension springs are available with different lengths, wire sizes and spring rates.
Precision spacers threaded through for mounting parts at a distance. Made from round stock, these parts come in lengths from 1/4'' to 1''.
Knurled nuts with a radius on the mating face to allow swiveling between fastened components.
Slotted head bolts with a radius under the head to allow swiveling between fastened components.
Male and female washers with either the inner or outer edges radiused to allow a mating component to swivel.
A clamp that accepts a single fastener, with an edge to secure the flange of a syncro.
We offer precision stainless steel washers in several diameters and thicknesses, with either a plain or curved shape.
Available in standard sizes, see our catalog for key seat dimensions.