GANTRY SYSTEM

4.gif (4941 bytes)

4_1.gif (2711 bytes)
PIC Gantry Systems are similar to System 10 (described in catalog 44) except split in order to separate the two halfs.  This is particularly useful when applications require operation between rails.  A complete system is made up of an actuated side and an idler side.  PIC offers two actuated side versions.  One is lead screw actuated, and for greater speed, the other is belt actuated.  Both have NEMA 23 or 34 motor adapters or handcranks.

For Bellows cover on lead screw, contact factory.
Specifications
Flatness: ±.0002 in/in
Straightness: ±.0002 in/in
Material: - Aluminum base, carriage and pillow blocks
- C1060 hardened & ground shafting & self-aligning recirculating linear ball bearings or 303 stainless steel shafting & engineered plastic bearings
- Radial bearings
- Stainless Steel zero backlash coupling
Lead Screw Actuated: - 303 stainless steel lead screw with engineered plastic nut
Belt Actuated: - Polyurethane belt with stainless steel tensile member

4_2.gif (20492 bytes)
Ordering Code - Idler Side

4_3.gif (3384 bytes)

        backtotop.gif (1247 bytes)
  back.gif (1947 bytes)forward.gif (1982 bytes)

Copyright © 1999 PIC Design. All Rights Reserved.